Bambu Printers (X1C and P1S)

Machine Status: Currently in the 有料盒子视频 Makerspace

The Bambu printers are equipped with an AMS system which allows for multi-filament printing.
The associated slicer is called as well as read more about these printers.

Note: TPU and CF Filaments are not compatible with the AMS.

Loading/Unloading Filament

With the AMS:

  1. On the X1C touchscreen under the settings tab, select the AMS tab. 

  2. There are 4 AMS slots; click on the slot you want to unload and select 鈥淯nload.鈥 Push the gray feeder tab on the AMS forward and the filament should come out easily.

  3. Once the filament has been unloaded, remove the spool and replace it with your chosen filament. 

  4. Click the slot again and select 鈥淟oad.鈥 You will be prompted to feed the end of the filament into the feeder. Once you can see filament coming out of the print head, click 鈥淒one.鈥

Without the AMS:

  1. First, disconnect the AMS tube. Find the blue and white coupler on the back of the printer. Pinch the coupler and remove the tube.

  2. Place your filament spool on the spool holder on the back of the printer. Feed the end of the filament through the tube you just disconnected. 

  3. In the filament menu, select the fifth slot (outside of the AMS) and click 鈥淟oad.鈥 

  4. Replace the AMS tube after unloading the filament.

Using the Slicer

Using Bambu Studio

  1. Open Bambu studio. Select 鈥淣ew Project鈥 and import your 3d object (Bambu Studio supports .3mf, .stl, .stp, .step, .amf, and .obj file types) using the cube with the 鈥+鈥 symbol. 

  2. Orient your object in the way you want it to print. Check the scale of the object and adjust it as needed. 

  3. Select your material; Bambu has pre-made settings for different filament types. Go through the settings to make sure that they are reasonable. 

  4. Once your print is prepared, click 鈥淪lice Plate.鈥 You can now export your print. This can be done over a network, or using an SD card.

    1. Over network: Open the 鈥渄evices鈥 tab to see printers. After slicing, click 鈥淧rint.鈥 From this menu, you can select which printer you want to send the print to.

    2. SD card: After slicing, click 鈥渆xport sliced plate file鈥 and select the SD card. Insert the SD card into the printer and print the project from files. 

When sending a print directly to the printer, ensure that the right printer and filament are selected/AMS enabled.
When sending a print directly to the printer, ensure that the right printer and filament are selected/AMS enabled.
To print from an SD card, select Export plate sliced file" and save your file to an SD card.
To print from an SD card, select Export plate sliced file" and save your file to an SD card.
Image showing how to add a new object from file.
Add a new object from file.
Use the move, scale, or lay-on-face options to orient your print.
Use the move, scale, or lay-on-face options to orient your print.
From the device tab, you can load/unload filament, or send a print directly to the printer.
From the device tab, you can load/unload filament, or send a print directly to the printer.